Produktkode: 11928

Alphacool NexXxoS ST30 Radiatorblokk

Product Information
The Alphacool NexXxoS V.2 radiator series represents the next generation of high-end solid copper radiators. They not only offer a new design (White Special Edition), but also technical highlights such as B. the patented screw plugs that are flush with the radiator.

Uncompromising in the choice of material
As usual, Alphacool also uses pure copper for the NexXxoS V.2 radiators of the White Special Edition. The antechambers, the water channels and the cooling fins are made of copper and are a unique selling point worldwide. No other manufacturer relies on pure copper for all of these components. As a result, the Alphacool radiators have been among the most popular and best on the market for many years, which provides the perfect basis for any water cooling system.

Full cooling performance
In order to maximize the performance of a radiator, Alphacool digs deep into its bag of tricks. Copper is the starting point. With a thermal conductivity of 400 W/mK for copper compared to 236 W/mK for aluminium, the winner is clear. In addition, there is the special fin density. Alphacool is one of the oldest water cooling companies and has performed countless lab tests. The result is a fin spacing of 15 FPI. This impedes the air flow relatively slightly, since the air can slide through without high pressure. However, the cooling performance does not suffer as a result, on the contrary. In order to use the airflow optimally, all cooling fins have small flaps. These are tiny wings that direct the airflow in the desired direction. In the case of the radiators, these are barely 1 mm high, but still ensure controlled air turbulence in order to increase cooling performance and minimize flow noise.

Patented locking screws
All NexXxoS V.2 radiators of the White Special Edition use Alphacool's patented screw plugs. Anyone who has mounted a radiator on the front or in the ceiling of a case knows that protruding locking screws mean that the radiator cannot be placed flush. With the patented screw plugs, Alphacool offers an excellent solution. They are completely sunk into the radiator and are flush with its surface. As a result, nothing stands in the way of clean assembly. Of course, the radiators with the flat locking screws also look much more elegant.

Enough connection options
All variants of the NexXxoS V.2 of the White Special Edition radiators have two connection options for IN and OUT on one side. On the opposite side, the NexXxoS V.2 radiators also have a fill or vent port. Of course, this connection can also be used to drain the water circuit.

The right size for every application
The NexXxoS V.2 radiators of the White Special Edition are available in the sizes 280mm and 360mm, each as an ST30 or XT45 variant. These differ quite simply by the thickness. ST30 stands for a thickness of 30 mm, XT45 for a thickness of 45 mm.

Safety first
Like the previous NexXxoS radiators, the NexXxoS V.2 of the White Special Edition offer special protection that prevents fan or assembly screws from being screwed in too deeply. Protective plates were placed under all mounting holes to prevent the screws from being screwed in too deeply. This protects the underlying cooling fins and water channels.

The king is dead, long live the king! Anyone who was happy with the previous NexXxoS radiators will appreciate the many small advantages of the NexXxoS V.2 radiators. Because only the details make a good radiator a perfect partner for your own water cooling.