Produktkode: DK-1623-A-P-1

Digitus DK-1623-A-P-1 nettverkskabel Grå 100 m Cat6a U/FTP (STP)

• Insulation: HD-PE
• Outer sheath diameter: 0.55 mm nominal
• Overall diameter: 5.8 mm nominal
• Tensile loading: 150 N max.
• Dynamic bending radius: 8x AD mm min.
• Static bending radius: 4x AD mm min.
• Shipping- and storage temperature range: -10 °C up to +75 °C
• Operating temperature range: -10 °C up to +60 °C
• Installation temperature range: 0 °C up to +50 °C
• DC loop resistance: ≤ 280 Ω km
• Resistance unbalance ≤ 2%
• Insulation resistance: ≥ 2000MΩ/km @500V
• Capacitance: nom. 48 nF/km @ 800 Hz
• Capacitance unbalance (pair-ground): ≤ 1500 nF/km
• Characeristic Impedance: 100 ± 15 Ohm @ 10-100 MHz
• NVP: 67%
• Propagation delay: nom. ≤ 555 ns/100 m
• Delay skew: nom. ≤ 50 ns/ 100 m
• Test voltage (DC 1 min) core/core: 1000V
• Coupling attenuation: ≥ 40 dB
• Capacitance: 48 pF/m nominal @ 800 Hz
• Capacitance unbalance (pair-ground): 1.5 pF/m max. @ 1 KHz
• Insulation resistance: 2 GOhm x km min.
• DC loop resistance: 147 Ohm/Km max. (2% max. resistance unbalance)
• Voltage resistance: 72 Vdc max.
• Coupling attenuation: 40 dB
• Signal propagation delay: 450 nS/100 m max.
• Propagation delay: 20 nS/100 m max.

Future-oriented standards and high-end quality for your network.

- Suitable for direct assembly of RJ45 connectors in order to produce patch cords
- Suitable for installations of class EA cable lines, 500 MHz
- According to the norms ANSI/TIA-568-C; ISO/IEC 11801 2nd Ed.; EN 50173-1: EN 50288-10-1
- Conductor: Copper (Cu)
- PoE+ ready

The raw patch cords are manufactured and tested acc. to the ISO/IEC 11801 and DIN EN 50173 specifications. They will guarantee that the installed cabling system is compliant with the ISO & EN channel specification requirements and therefore provide optimum performance levels for your cablings.The raw patch cords are suitable for the direct assembly of RJ45 connector in order to produce patch cords.